Page 6

Test Installation

There are several methods for verifying a cluster service installation after the Setup process is complete. These include:

• Cluster Administrator: If installation was completed only on node 1, start Cluster Administrator, and then attempt to connect to the cluster. If a second node was installed, start Cluster Administrator on either node, connect to the cluster, and then verify that the second node is listed.
• Services Applet: Use the services snap-in to verify that the cluster service is listed and started.
• Event Log: Use the Event Viewer to check for ClusSvc entries in the system log. You should see entries confirming that the cluster service successfully formed or joined a cluster.
• Cluster service registry entries: Verify that the cluster service installation process wrote the correct entries to the registry. You can find many of the registry settings under HKEY_LOCAL_MACHINE\Cluster
• Click Start, click Run, and then type the Virtual Server name. Verify that you can connect and see resources.

Test Failover

Verify Resources will Failover

1. Click Start, click Programs, click Administrative Tools, and then click Cluster Administrator, as shown in the figure below.

2. Right-click the Disk Group 1 group, and then click Move Group. The group and all its resources will be moved to another node. After a short period of time, the Disk F: G: will be brought online on the second node. Watch the window to see this shift. Quit Cluster Administrator.

<- Previous Page